HOMEPRODUCTSCOMPANYCONTACTFAQResearchDictionaryPharmaSign Up FREE or Login

Evaluation of self-adhesive resin cement bond strength to yttria-stabilized zirconia ceramic (Y-TZP) using four surface treatments.

AbstractPURPOSE:
To evaluate the influence of four surface treatments on the bond strength of a self-adhesive resin cement to an yttria-stabilized zirconia (Y-TZP) ceramic material (Lava Frame zirconia).
MATERIALS AND METHODS:
Forty plates (8 x 6 x 1 mm) of a Y-TZP ceramic restorative material were randomly assigned to four groups (n = 10) according to the surface treatments: control, no treatment; airborne-particle abrasion with 50-μm Al2O3; coating with an MDP-based primer; conditioning with Rocatec System. The ceramic plates treated with each of the four methods were further divided into 2 subgroups according to the resin cement tested: RelyXTM ARC (ARC, conventional) and RelyXTM Unicem (Ucem, self-adhesive). The resin cements were put into PVC tubes (diameter 0.75 mm, 0.5 mm height) placed on the ceramic plate surfaces. After water storage at 37°C for 24 h, the specimens were submitted to a microshear bond strength (μSBS) test at a crosshead speed of 1.0 mm/min.
RESULTS:
The surface treatments significantly influenced the μSBS (p < 0.05). For the four surface treatments, UCem presented significantly higher μSBS than ARC (p < 0.05). For both resin cements, the best result was produced by the MDP-based primer: ARC 15.9 ± 5.0 MPa and UCem 36.2 ± 2.1 MPa. The highest μSBS values were presented by UCem on ceramic plates treated with the MDP-based primer (36.2 ± 2.1 MPa) and Rocatec system (37.4 ± 2.3 MPa).
CONCLUSION:
Irrespective of the surface treatment, the self-adhesive resin cement performed better in terms of bond strength to yttria-stabilized zirconia ceramic than did conventional resin cement.
AuthorsLuciana Miragaya, Luciane Cople Maia, Carlos Eduardo Sabrosa, Mário Fernando de Goes, Eduardo Moreira da Silva
JournalThe journal of adhesive dentistry (J Adhes Dent) Vol. 13 Issue 5 Pg. 473-80 (Oct 2011) ISSN: 1461-5185 [Print] Germany
PMID21246067 (Publication Type: Comparative Study, Journal Article, Randomized Controlled Trial)
Chemical References
  • Alloy Primer
  • Coated Materials, Biocompatible
  • Dental Cements
  • Methacrylates
  • Polymethacrylic Acids
  • Rely X Unicem
  • RelyX ARC
  • Resin Cements
  • Rocatec
  • Silanes
  • Thiones
  • yttria stabilized tetragonal zirconia
  • Water
  • Dental Porcelain
  • methacryloxypropyltrimethoxysilane
  • Polyethylene Glycols
  • Bisphenol A-Glycidyl Methacrylate
  • Yttrium
  • methacryloyloxydecyl dihydrogen phosphate
  • Zirconium
  • Aluminum Oxide
Topics
  • Aluminum Oxide (chemistry)
  • Bisphenol A-Glycidyl Methacrylate (chemistry)
  • Coated Materials, Biocompatible (chemistry)
  • Dental Bonding
  • Dental Cements (chemistry)
  • Dental Etching (methods)
  • Dental Porcelain (chemistry)
  • Dental Stress Analysis (instrumentation)
  • Humans
  • Materials Testing
  • Methacrylates (chemistry)
  • Microscopy, Electron, Scanning
  • Polyethylene Glycols (chemistry)
  • Polymethacrylic Acids (chemistry)
  • Resin Cements (chemistry)
  • Shear Strength
  • Silanes (chemistry)
  • Spectrometry, X-Ray Emission
  • Stress, Mechanical
  • Surface Properties
  • Temperature
  • Thiones (chemistry)
  • Time Factors
  • Water (chemistry)
  • Yttrium (chemistry)
  • Zirconium (chemistry)

Join CureHunter, for free Research Interface BASIC access!

Take advantage of free CureHunter research engine access to explore the best drug and treatment options for any disease. Find out why thousands of doctors, pharma researchers and patient activists around the world use CureHunter every day.
Realize the full power of the drug-disease research graph!


Choose Username:
Email:
Password:
Verify Password:
Enter Code Shown: