19 mm sized bileaflet valve prostheses' flow field investigated by bidimensional laser Doppler anemometry (part II: maximum turbulent shear stresses)

Abstract

The investigation of the flow field generated by cardiac valve prostheses is a necessary task to gain knowledge on the possible relationship between turbulence-derived stresses and the hemolytic and thrombogenic complications in patients after valve replacement. The study of turbulence flows downstream of cardiac prostheses, in literature, especially concerns large-sized prostheses with a variable flow regime from very low up to 6 L/min. The Food and Drug Administration draft guidance requires the study of the minimum prosthetic size at a high cardiac output to reach the maximum Reynolds number conditions. Within the framework of a national research project regarding the characterization of cardiovascular endoprostheses, an in-depth study of turbulence generated downstream of bileaflet cardiac valves is currently under way at the Laboratory of Biomedical Engineering of the Istituto Superiore di Sanita. Four models of 19 mm bileaflet valve prostheses were used: St Jude Medical HP, Edwards Tekna, Sorin Bicarbon, and CarboMedics. The prostheses were selected for the nominal Tissue Annulus Diameter as reported by manufacturers without any assessment of valve sizing method, and were mounted in aortic position. The aortic geometry was scaled for 19 mm prostheses using angiographic data. The turbulence-derived shear stresses were investigated very close to the valve (0.35 D0), using a bidimensional Laser Doppler anemometry system and applying the Principal Stress Analysis. Results concern typical turbulence quantities during a 50 ms window at peak flow in the systolic phase. Conclusions are drawn regarding the turbulence associated to valve design features, as well as the possible damage to blood constituents.

• Authors: V Barbaro, M Grigioni, C Daniele, G D'Avenio, G Boccanera
• Journal: The International journal of artificial organs (Int J Artif Organs) Vol. 20 Issue 11 Pg. 629-36 (Nov 1997) ISSN: 0391-3988 [Print] United States
• PMID: 9464873 (Publication Type: Comparative Study, Journal Article)

Topics

• Aortic Valve
• Biomechanical Phenomena
• Blood Flow Velocity
• Device Approval
• Guidelines as Topic
• Heart Valve Prosthesis
• Laser-Doppler Flowmetry (instrumentation)
• Mitral Valve
• Models, Theoretical
• United States
• United States Food and Drug Administration