Effect of alloy type on the life-time of torsion-preloaded nickel-titanium endodontic instruments.

Abstract

This study was aimed to evaluate the effect of torsional preloads on the cyclic fatigue life of nickel-titanium (NiTi) instruments with different history of heat treatments by manufacturers. WaveOne (Primary) made of M-wire, K3XF (#30/0.06) of R-phase, and ProTaper (F2) of conventional NiTi alloy was used. Each file was preloaded at four conditions (nil, 25, 50, and 75% of their mean ultimate torsional strength) before fatigue testing. The torsional preloads 10-, 30-, or 50-times were applied by securing 5 mm of the file tip, rotating it until the preset torque was attained before returning to the origin. Then, the number of cycles to failure (NCF) was evaluated by rotational bending in a simulated canal. Data were analyzed using multiple linear regression analysis and two-way ANOVA. Fractured instruments were examined under scanning electron microscope (SEM). SEM showed that most WaveOne after 75% preloading, regardless of repetitions, showed some longitudinal cracks parallel to the long axis of the file, which were rare for K3XF. Regression analysis revealed that the brand of instrument was the most critical factor. At up to 75% preloading, ProTaper and K3XF did not show any significant decline in NCF. For 30-repetition groups of WaveOne, the 50 and 25% torsion preloaded groups showed a significantly higher NCF than the 0 and 75% groups. Within the limitations of this study, the alloy type of NiTi instrument have a significant effect on the phenomenon that a certain amount of torsional preload may improve the cyclic fatigue resistance of NiTi rotary instruments.

• Authors: Jung-Hong Ha, Sung Kyo Kim, Gary Shun-Pan Cheung, Seong Hwa Jeong, Yong Chul Bae, Hyeon-Cheol Kim
• Journal: Scanning (Scanning) 2015 May-Jun Vol. 37 Issue 3 Pg. 172-8 ISSN: 1932-8745 [Electronic] England
• PMID: 25676195 (Publication Type: Comparative Study, Journal Article, Research Support, Non-U.S. Gov't)
• Copyright: © Wiley Periodicals, Inc.

Chemical References

• Alloys
• Nickel
• Titanium

Topics

• Alloys (chemistry)
• Dental Pulp Cavity
• Endodontics (instrumentation)
• Equipment and Supplies
• Humans
• Longitudinal Studies
• Materials Testing
• Microscopy, Electron, Scanning
• Models, Theoretical
• Nickel
• Root Canal Preparation (methods)
• Stress, Mechanical
• Surface Properties
• Titanium
• Torsion, Mechanical