[Study on the determinations of Ni, Fe, Mo, Mn and B in Ti/TiC composite material by atomic emission spectrometry].

Abstract

The present paper describes the determination of trace Ni, Fe, Mo, Mn and B in Ti/TiC composite material using carbon powder, calcium carbonate, cupric oxide and beryllium oxide-as buffer by atomic emission spectrometry (ASE). Be 298.61 nm was selected as internal standard line. Sample separation and chemistry treatment were not requirel. The sample was directly loaded into ordinary electrode. The method is simple, rapid and accurate. The requirement of determination, and factors of influence were studied. A new method has developed for the determination of Ni, Fe, Mo, Mn and B. The analysis lines of Ni, Fe, Mo, Mn and B are 300.36, 248.33, 315.82, 260.57 and 249.68 nm respectively. The internal standard line of Be is 298.61 nm. The linear ranges of the determination of Ni, Fe, Mo, Mn and B are 0.003%-0.30%, 0.001%-0.20%, 0.003%-0.30%, 0.001%-0.20%, 0.001%-0.20% respectively. The detection limits of Ni, Fe, Mo, Mn and B are 0.003%; 0.001%, 0.003%, 0.001% and 0.001% respectively. The ranges of the recovery of Ni, Fe, Mo, Mn and B are 95.80%-104.8%, and the standard relative deviations (RSD) are less than 5.0% (n = 9). The method has been applied to the determination of Ni, Fe, Mo, Mn and B with satisfactory results.

• Authors: Hui-Zhi Li, Dian-Tang Zhai, Chong-Juan Xu, Mei-Shan Pei
• Journal: Guang pu xue yu guang pu fen xi = Guang pu (Guang Pu Xue Yu Guang Pu Fen Xi) Vol. 27 Issue 6 Pg. 1204-6 (Jun 2007) ISSN: 1000-0593 [Print] China
• PMID: 17763793 (Publication Type: English Abstract, Journal Article)