[Interface bond and compatibility between GI-II glass/alumina composite and Vitadur alpha veneering porcelain].

Abstract

OBJECTIVE:

Multiple layer techniques were commonly employed in fabricating all-ceramic restorations. Bond and compatibility between layers were vitally important for the clinical success of the restorations. The purposes of this study were to investigate the bond of the interface between the GI-II glass/alumina composite and Vitadur alpha veneering porcelain, and to study the thermal compatibility between them.

METHODS:

Prepared a bar shaped specimen of GI-II glass/alumina composite 25 mm x 5 mm x 1 mm in size, with bottom surface pre-notched. The upper surface was veneered with Vitadur alpha veneering porcelain (0.2 mm opaque dentin and 0.6 mm dentin porcelain), then fractured and the fracture surface were examined under scanning electron microscope (SEM) and electron microprobe analyzer (EMPA) with electron beam of 10 micrometer in diameter; ten all-ceramic single crowns for an upper right central incisor were fabricated and the temperatures of thermal shock resistance were tested.

RESULTS:

SEM observation showed tight bond between the composite and the porcelain; The results of EMPA showed that penetration of Na, Al elements from glass/alumina into veneering porcelain and Si, K, Ca elements from veneering porcelain into glass/alumina occurred after sintering baking; The temperature of thermal shock resistance for anterior crowns in this study was 158 +/- 10.3 degrees C, cracks were mainly distributed in veneering porcelain with thicker layer.

CONCLUSIONS:

Chemical bond exists between the GI-II glass/alumina composite and Vitadur alpha veneering porcelain, and there is good thermal compatibility between them.

• Authors: Yukun Meng, Yonglie Chao, Yunmao Liao
• Journal: Zhonghua kou qiang yi xue za zhi = Zhonghua kouqiang yixue zazhi = Chinese journal of stomatology (Zhonghua Kou Qiang Yi Xue Za Zhi) Vol. 37 Issue 1 Pg. 69-71 (Jan 2002) ISSN: 1002-0098 [Print] China
• PMID: 11955368 (Publication Type: English Abstract, Journal Article)

Chemical References

• Dental Porcelain
• Aluminum Oxide

Topics

• Aluminum Oxide (chemistry)
• Dental Porcelain (chemistry)
• Dental Stress Analysis
• Humans
• Microscopy, Electron, Scanning