Solidification/stabilization of electric arc furnace dust using coal fly ash. Analysis of the stabilization process.

Abstract

In this paper, the stabilization of electric arc furnace (EAF) dust containing hazardous metals such as Pb, Cd, Cr or Zn is described. The treatment involves a waste solidification/stabilization (S/S) process, using coal fly ash as the fundamental raw material and main binder. The article also contains a brief review of the most important recent publications related to the use of fly ash as S/S agents. The efficacy of the process has been evaluated mainly through leaching tests on the solidified products and compliance with some imposed leachate limits. The concentration of metals leaching from the S/S products was strongly leachate pH dependent; thus, the final pH of the leachate is the most important variable in reaching the limits and, therefore, in meeting the stabilization goals. In this study, the dependence relationship between the leachate pH and the concentrations of metals in the leachate are analyzed; in some cases, this allows us to estimate the speciation of contaminants in the S/S solids and to understand the mechanism responsible for reduced leachability of heavy metals from solidified wastes.

• Authors: C F Pereira, M Rodríguez-Piñero, J Vale
• Journal: Journal of hazardous materials (J Hazard Mater) Vol. 82 Issue 2 Pg. 183-95 (Mar 30 2001) ISSN: 0304-3894 [Print] Netherlands
• PMID: 11230914 (Publication Type: Journal Article)

Chemical References

• Coal
• Dust
• Metals, Heavy

Topics

• Coal
• Dust
• Environmental Pollution (prevention & control)
• Hydrogen-Ion Concentration
• Metals, Heavy (analysis, chemistry)
• Refuse Disposal