Transbond XT

03/01/2010 - "Brackets (Mini Twin, Dentaurum, Ispringen, Germany) were bonded with Transbond XT (3M Unitek, Monrovia, Calif) adhesive and light cured with low-intensity halogen light for 40 seconds, high-intensity halogen light for 40 seconds, light-emitting diode (LED) light for 20 seconds, and plasma arc light (PAC) for 6 seconds. "
12/01/2004 - "In the Transbond XT group, the proportion of bond failures was 3.41 per cent for both the halogen and the plasma arc lamp. "
08/01/2008 - "Three light sources, high-intensity halogen, blue light-emitting diode (LED), and xenon plasma arc (PAC), were used for polymerization of Transbond XT. "
01/01/2011 - "After application of primer, metallic brackets were bonded to the buccal surface using Transbond XT, forming 8 groups (n = 20), depending on the light source used for photoactivation (AccuCure 3000 argon laser--20 s, Apollo 95E plasma arc--12 s, UltraLume 5 LED--40 s and XL2500 halogen light--40 s) and experimental conditions without (Groups 1 to 4) or with thermocycling (Groups 5 to 8). "
05/01/2003 - "This study evaluated the shear-peel bond strength and mode of bond failure of 3 curing devices (plasma arc light, argon laser, and conventional halogen light) and 2 orthodontic bracket adhesives with different filler contents (Transbond XT and Adhesive Precoated [APC]). "

01/01/2018 - "The aim of this study was to evaluate the shear bond strength of three different adhesives (Transbond XT, Light Cure Adhesive, 3M Unitek; Transbond Plus, Light Cure Band Adhesive, 3M Unitek; Transbond Supreme LV, Low Viscosity Light Cure Adhesive, 3M Unitek), which were applied to the etched enamel of occlusal faces of mandibular molar teeth to gain bite opening. "

06/01/2013 - "The initial bond strength of Transbond Supreme LV was significantly higher than Transbond XT, while the fatigue bond strengths of both resins were comparable. "
06/01/2013 - "No statistically significant difference was found between the fatigue bond strengths of Transbond Supreme LV and Transbond XT (P = 0·323). "
11/01/2010 - "There were no statistically significant differences between the mean initial (unfatigued) and fatigue bond strengths of Transbond XT and Transbond PLUS Color Change under laboratory conditions. "
11/01/2010 - "The fatigue mean shear bond strength for Transbond XT (15.87 MPa) was similar to that of Transbond PLUS Color Change (15.33 MPa), and the difference was not statistically significant (p > 0.999). "

11/01/2007 - "Twenty orthodontic specialists bonded 20 preadjusted straight wire brackets (Victory, 3M Unitek) on a typodont with a Class I crowded malocclusion in a split-mouth design, with one-half of the brackets bonded with APC PLUS adhesive system and the other half with Transbond XT. "

09/01/2010 - "At day 15, severe inflammation was observed in Group 3 (Transbond XT) compared to other groups. "