|1.||Lekesiz, H: 1 article (09/2014)|
|2.||Anusavice, Kenneth J: 1 article (11/2013)|
|3.||Esquivel-Upshaw, Josephine F: 1 article (11/2013)|
|4.||Jadaan, Osama M: 1 article (11/2013)|
|5.||Silva, Eduardo Moreira da: 1 article (09/2010)|
|6.||Guimarães, José Guilherme Antunes: 1 article (09/2010)|
|7.||Noronha Filho, Jaime Dutra: 1 article (09/2010)|
|8.||Brandão, Natasha Lamego: 1 article (09/2010)|
|9.||Poskus, Laiza Tatiana: 1 article (09/2010)|
|10.||Li, Yu-long: 1 article (02/2009)|
02/01/2008 - "For the components of the Empress 2 system, the fracture toughness K(IC) was determined, and the crack propagation parameters n and A were determined in a dynamic fatigue method. "
02/01/2009 - "To study mechanical and cyclic fatigue behavior of IPS Empress2 under cyclic loading, and to establish guidelines for the use and design of all-ceramic crowns. "
11/01/2013 - "Time-dependent fracture probability analyses were computed by CARES/Life software and finite element analysis, using dynamic fatigue strength data for monolithic discs of a lithium-disilicate glass-ceramic core (Empress 2), and ceramic veneer (Empress 2 Veneer Ceramic). "
06/26/2004 - "The geometric mean marginal gap values (microm, before cementation, after cementation and after thermo-mechanical fatigue) amounted to 53, 63 and 62 for the ceramic metal FPD, 57, 71 and 68 for the Empress 2 FPD and 55, 67 and 68 for the EPC FPD. "
06/26/2004 - "This study compares the marginal accuracy of posterior metal ceramic (MC), all-ceramic IPS Empress 2 and experimental pressed ceramic (EPC-VP 1989/4) three-unit fixed partial dentures (FPD), before and after luting and after thermo-mechanical fatigue in a dual-axis chewing simulator. "
|2.||AIDS-Related Complex (ARC)
09/01/2010 - "This study analyzed the degree of conversion (DC%) of four resin-based cements (All Ceram, Enforce, Rely X ARC and Variolink II) activated by two modes (chemical and dual), and evaluated the decrease of DC% in the dual mode promoted by the interposition of a 2.0-mm-thick IPS Empress 2 disc. "
|6.||Metal Ceramic Alloys
|7.||Dental Porcelain (Porcelain)
|9.||Aluminum Oxide (Sapphire)
|1.||Fixed Partial Denture (Pontic)
|2.||Crowns (Crown, Dental)