|1.||Thompson, Van P: 9 articles (02/2015 - 01/2009)|
|2.||Silva, Nelson R F A: 8 articles (02/2015 - 01/2010)|
|3.||Zhang, Yu: 5 articles (11/2015 - 09/2006)|
|4.||Bonfante, Estevam A: 5 articles (02/2015 - 04/2010)|
|5.||Coelho, Paulo G: 5 articles (04/2013 - 04/2010)|
|6.||Aboushelib, Moustafa N: 4 articles (04/2012 - 07/2008)|
|7.||Rosentritt, Martin: 3 articles (08/2014 - 04/2008)|
|8.||Magne, Pascal: 3 articles (02/2013 - 02/2011)|
|9.||Liu, Xuanyong: 3 articles (01/2013 - 07/2006)|
|10.||Zavanelli, Ricardo A: 3 articles (08/2012 - 04/2010)|
04/01/2002 - "In relation to the radiolucent cement, the addition of zirconium dioxide improved significantly the tensile strength, the fracture toughness and the fatigue crack propagation resistance. "
05/01/2015 - "The purpose of the study was to assess and compare the fatigue and fracture resistance of one- and two-piece computer-aided design/computer-assisted manufacture (CAD/CAM) zirconia implant abutments with an internal-hex connection and prefabricated commercially available zirconia stock abutments. "
07/01/2009 - "This study investigated the load fatigue performance of four implant systems and their corresponding zirconia ceramic abutments at the manufacturers' recommended torque levels. "
03/01/2008 - "The purpose of this study was to test in vitro the fatigue and fracture properties of the Zirconia Everest core material after being veneered with a sintered or a heat-pressed veneer material. "
08/01/2007 - "The aim of this study was to evaluate and compare the biaxial flexural strength, hardness and fatigue life of colored and uncolored zirconia in the LAVAtrade mark system. "
04/01/2008 - "Zirconia RBFPDs showed improved survival with increased tooth mobility, but the framework design showed only a minor influence on loss rate and fracture resistance. "
02/01/2014 - "Increased tooth mobility because of loss of alveolar bone support: a hazard for zirconia two-unit cantilever resin-bonded FDPs in vitro?"
04/01/2008 - "The zirconia framework design varied between a 2-retainer RBFPD with 3 different levels of tooth mobility (groups 1 to 3) and a 1-retainer cantilever version with 2 different grades of tooth mobility (groups 4 and 5). "
02/01/2014 - "The results support the assumption that zirconia-based two-unit cantilever RB-FDPs may be an appropriate treatment option, even if abutment tooth mobility increase because of alveolar bone loss. "
02/01/2014 - "This study evaluates in vitro the impact of increased abutment tooth mobility on survival of zirconia-based two-unit cantilever resin-bonded fixed dental prosthesis (RB-FDP) by long-term dynamic loading in a chewing simulator. "
09/01/2010 - "The degrees of wear of the antagonistic teeth were 0.119 ± 0.059 mm(3) in Group 1, 0.078 ± 0.063 mm(3) in Group 3, and 0.031 ± 0.033 mm(3) in Group 2. Statistical significance was found between Group 1 and Groups 2 and between Group 2 and 3, whereas no statistical significance was found between Group 1 and Group 3. Despite the limitations of this study on the evaluation of antagonistic teeth wear, the degree of antagonistic tooth wear was less in zirconia than feldspathic dental porcelain, representing that the zirconia may be more beneficial in terms of antagonistic tooth wear."
09/01/2015 - "Surface bioactivation of zirconia-containing components for dental implant applications will enable their improved clinical performance by incorporating signalling oligopeptides to accelerate osseointegration, improving permucosal sealing, and/or incorporating antimicrobial properties to prevent peri-implant infections."
01/28/2011 - "A highly sensitive and selective electrochemical DNA signaling scheme, which identifies the point mutation existing in target DNA sequence, is developed based on the combination of label-free hairpin probe (HP)/DNA endonuclease with zirconia (ZrO(2)) nanoparticle film, representing a promising screening platform for the accurate diagnosis of infections and genetic diseases as well as for environmental and forensic applications."
|5.||Nonvital Tooth (Endodontically-Treated Teeth)
06/01/2014 - "The purpose of this study was to evaluate fracture resistance of endodontically treated teeth restored with prefabricated zirconia post (CP), milled zirconia post (MZ), pressable ceramic post (PC) and cast metal post (Ni-Cr) of 1.4 and 1.7 mm diameter. "
08/01/2004 - "There are few published studies analyzing the effects of different ferrule lengths of endodontically treated teeth in relationship to newly developed fiber-reinforced and zirconia dowel systems. "
08/01/2004 - "An in vitro study evaluating the effect of ferrule length on fracture resistance of endodontically treated teeth restored with fiber-reinforced and zirconia dowel systems."
02/18/2014 - "To compare the fracture resistance of endodontically-treated teeth restored with prefabricated zirconia posts or one-piece computer aided design and computer aided manufacture (CAD/CAM) zirconia posts and cores, and unrestored endodontically-treated teeth. "
09/01/2013 - "Are implants more reliable than severely compromised endodontically treated teeth as abutments for zirconia-based FPDs? "
|1.||Dental Porcelain (Porcelain)
|2.||Bone Cements (Bone Glue)
|3.||Dental Implants (Dental Implant)
|7.||zirconium oxide (zirconia)
|8.||Aluminum Oxide (Sapphire)
|1.||Crowns (Crown, Dental)
|3.||Fixed Partial Denture (Pontic)
|5.||Hip Replacement Arthroplasty (Total Hip Replacement)